Why Choose a Drum Chipper for Wood Processing?
A drum chipper can produce a steady stream of chips from logs, branches, and clean wood residues. Its rotating knives cut material against a screen, helping control the resulting particle-size distribution. That matters when buyers specify a class under ISO 17225-4:2021. A chipper alone cannot guarantee compliance. Wood species, moisture, knife sharpness, feed rate, and screen condition all affect the finished batch. Small changes show up in the chip pile.
The standard groups graded wood chips into particle-size classes, including P16S, P31S, P45S, P63, and P100. These labels describe sieve-based size distributions, not one exact chip length. P16S is finer than P31S and P45S, while P63 and P100 allow larger particles. Each class sets limits for the main fraction, fines, and oversized pieces. A handful of chips can look uniform, yet still fail a measured distribution. Testing representative samples is more reliable than judging by eye.
Tips: Match the chip class to the receiving equipment and contract. Check screens and knives regularly, then record settings and sample results. It takes a little discipline. Moisture content is classified separately, so confirm that requirement too.